Atlantis Land A02-AP2-W54M Guide de l'utilisateur télécharger pdf (Page 59)

Wireless MIMO Multi-Function Access Point

A02-AP2-W54M Pag. 53

Answer

Approved in June, 2003 as an IEEE

standard for wireless

local area networks (WLANs), 802.11g offers wireless

transmission over relatively short distances at up to 54

megabits per second (Mbps) compared with the 11 megabits

per second of the 802.11b (Wi-Fi) standard. Like 802.11b,

802.11g operates in the 2.4 GHz

range and is thus compatible

with it.

Question

What is WDS?

Answer

WDS (Wireless Distribution System) is a technology that allow

at a pair of Wireless Multi-Function APs operating under

Bridge mode to act as the bridge that connect two Ethernet

networks or Ethernet enabled clients together. Repeat Mode

is able to extend the effective range and coverage of the

wireless network.

Question

I can’t use AP Repeat Mode. What can I do?

Answer

If you have some problem, follow these steps:

• Insert in Security section settings about WEP/WPA (if

present) and verify SSID and trasmissions channel.

• Make sure that both AP has same firmware version.

• Use A02-AP2-W54M for like AP and Repeater

Question

Why 2 AP trasmitting on different channel making

interferences?

Answer

Every channel occupies about 22Mhz; being ISM band made

of 80 Mhz, you can utilize only 3 channel without overlap.

We suggest to set AP with 5 channel interval between 2 AP

utilized. (ex. AP1-channel 1, AP2-channel6).

Interferences are making when 2 or more channels overlap

themselves.

Follow pictures explain this:

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 65

Pas de commentaire

Atlantis Land A02-AP2-W54M Guide de l'utilisateur Page 59