Atlantis Land A02-AP2-W54M Guide de l'utilisateur télécharger pdf (Page 33)

Wireless MIMO Multi-Function Access Point

A02-AP2-W54M Pag. 27

3.6.1 LAN Setup

In this page, you can set IP Address of Wireless MIMO Multi-Function AP. It can

be obtained automatically from a DHCP server present in LAN or manually

assigned.

Dynamic IP (DHCP Client): Select this to permit at AP to obtain automatically an

IP address from a DHCP server present on LAN. Check Dynamic IP and click on

Apply and after on Save to take effect.

Static IP: Select this to assign a static IP Address, Subnet Mask e Gateway to

Wireless MIMO Multi-Function AP.

• LAN IP Address: Show IP LAN Address of Access Point (Default

IP=192.168.1.254). If you change this value, it’s necessary to check that

all client in your LAN (if aren’t set on DHCP Client) have an IP Address

compatible.

• Subnet Mask: Show Subnet Mask (Default value is: 255.255.255.0).

• Default Gateway: Show Default Gateway IP Address. it’s necessary

insert IP of device that offer you an Internet connection.

• Primary DNS Server: Show DNS Server IP address.

• Secondary DNS Server: Show DNS Server IP address (it is active when

primary DNS Server doesn’t work).

• MTU: Maximum Transmit Unit.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 64 65

Pas de commentaire

Atlantis Land A02-AP2-W54M Guide de l'utilisateur Page 33